1n5400 thru 1n5408 general purpose plastic rectifier voltage:50 to 1000v current:3.0a feature do-201ad molded case feature for auto insertion high current capability low leakage current high surge capability high temperature soldering guaranteed 250 c/10sec/0.375lead length at 5 lbs tension mechanical data terminal:plated axial leads solderable per mil-std 202e, method 208c case:molded with ul-94 class v-0 recognized flame retardant epoxy polarity:color band denotes cathode mounting position:any dimensions in inches and (millimeters) maximum ratings and electrical characteristics (single-phase, half -wave, 60hz, resistive or induc tive load rating at 25 c, unless otherwise stated, for capacitive load, derate current by 20%) symbol 1n 5400 1n 5401 1n 5402 1n 5403 1n 5404 1n 5405 1n 5406 1n 5407 1n 5408 units maximum recurrent peak reverse voltage vrrm 50 100 200 300 400 500 600 800 1000 v maximum rms voltage vrms 35 70 140 210 280 350 420 560 700 v maximum dc blocking voltage vdc 50 100 200 300 400 500 600 800 1000 v maximum average forward rectified current 3/8lead length at ta =80 c if(av) 3.0 a peak forward surge current 8.3ms single half sine-wave superimposed on rated load ifsm 200.0 a maximum instantaneous forward voltage at rated forward current vf 1.1 v maximum full load reverse current full cycle at t l =75 c ir(av) 30.0 m a maximum dc reverse current ta =25 c at rated dc blocking voltage ta =150 c ir 5.0 500.0 m a m a typical junction capacitance (note 1) cj 30.0 pf typical thermal resistance (note 2) r(ja) 20.0 c/w storage and operation junction temperature tstg -50 to +150 c note: 1. measured at 1.0 mhz and applied voltage of 4.0v dc 2. thermal resistance from junction to ambient at 0 .375lead length, p.c. board mounted rev.a5 www.gulfsemi.com
ratings and characteristic curves 1n5400 thru 1n540 8 1 1 rev.a5 www.gulfsemi.com
|
